News Center

Effect of Modified Zeolite on Adsorption Characteristics of Heavy Metal Ions

The adsorption properties of natural zeolite and modified zeolite on Pb2 were studied, and the effects of different factors on the adsorption of Pb2 by zeolite were discussed. The results showed that the adsorption of Pb2 on natural zeolite could be promoted by three different modification methods. Sodium hydroxide modified zeolite has the best adsorption effect of Pb2 +, followed by potassium nitrate modified zeolite

12

2023/12

Zeolite filter is a powerful material

Natural zeolite is aluminum silicate minerals, the appearance of white or brick red, is a weak acid cation exchanger, the artificial introduction of active components, so that it has a new ion exchange or adsorption capacity, adsorption capacity also increased accordingly. Mainly used for small and medium-sized boiler water softening treatment, in order to remove the calcium and magnesium ions in the water, thereby reducing the formation of scale in the boiler

12

2023/12

Polyaluminum chloride is a kind of inorganic material, is a new water purification material and inorganic polymer coagulant

Polyaluminum chloride is a kind of inorganic material, is a new water purification material and inorganic polymer coagulant, referred to as poly aluminum. It is a new type of water purifying agent with a wide range of applications, mainly used in drinking water treatment, industrial wastewater treatment and sewage treatment.

12

2023/12

There are so many classifications of sodium hydroxide, where is the difference between flake alkali, solid alkali and granular alkali?

Sodium hydroxide is a white crystalline powder, deliquescence, soluble in water and ethanol, slightly soluble in glycerol, insoluble in acetone, ether and benzene, miscible in acidic solution, the aqueous solution is strongly alkaline. Sodium hydroxide is an important industrial raw material

12

2023/12

Influence of various indexes of calcium hydroxide desulfurizer on the effect

The alkalinity mainly affects the dissolution rate of H2S in the alkaline liquid film and the degree of further dissociation of dissolved H2S. According to the material introduction, the dissociation degree of H2S increases with the increase of pH, but it is not proportional to pH. When pH is 7-9, the desulfurization ability is higher.

16

2023/11

< 12 >
SINOPMC

Address:

Room 506, 5th Floor, C- Building, Oriental International Plaza, 152 Jianshe Road, Tangshan City, Hebei Province, China



Copyright @ 2024 SINOPMC INDUSTRY LIMITED

Business License

SEO